How to get lightsaber sound effect off sound bar

#How to get lightsaber sound effect off sound bar manual#

You do not need to remove the screw, simply back it out enough to provide clearance. To insert your blade, remove black dust cap from blade, and use the wrench to make sure the set screw is not obstructing the inside of the emitter. When you get your saber, it also comes with a hex wrench (3/32 for Combat Class) that is used to tighten and loosen the blade retention set screw. Since we use 2 different lighting technologies, there are 2 different blades and though installed in a similar manner, have some differences that are important to go over. When you recieve your saber, the blade is not installed for shipping and will require you to insert it into the emitter before use. Using the same motion to scroll through the blade effects, simply tap the aux button to select, or press and hold to return to color selection. This gives the user access to any pre-programmed blade effects. With a long press instead of a tap of the aux button during the color selection, you gain access to the 'Blade Profiles', also announced with an audible cue. When you reach the color you want, you can simply tap the aux button to lock in the color or. You will hear 'clicking' between each color preset to provide an audible guide. You can then move the saber in a fan motion to select from the colors like a color wheel. You will hear the 'Spectrum' voice announcement. To activate Spectrum, press and release both the main activation and the aux button simultaneously. On Plecter Pixel equipped sabers, some blade effect profiles come preset for you to enjoy. You can have a choice from 16 colors and 16 effect profiles using this feature. Single color sabers are not set up to use this feature. This feature does require either a Plecter Pixel or an RGB Suncrusher option. Spectrum is the feature that allows the user to switch between blade colors and special FX on the fly, without the need to hook it up to a computer or app. Once you reach the desired font, press and hold the aux switch until you hear it 'boot' the font. Each font has a vocal call out so that you know what font it is. Once you hear the 'Sound bank selection' vocal cue, you can tap the aux button to scroll forward, or tap the main switch to go backward in the menu. This is where you can change the sound font you wish to use. When the saber is 'off', pressing and holding the aux switch will activate the vocal 'font' menu. depending on the individual 'sound font' currently active on the saber. Pressing the aux switch while executing a motion such as a swing or clash will activate various sound effects such as force push, force lightning etc. Pressing and holding the aux switch will activate a 'lock up' or 'cutting' sound. While the saber is on, tapping the auxilliary switch will activate Blaster FX sounds per press. To turn the saber off, press and hold the main switch until it turns off. To ignite the saber, simply press and release the main switch. On models where there is no 16mm AV switch, there are usually 2 smaller switches in which case, the more forward switch (towards the blade) is going to be your main activation switch. The 16mm AV switch is the main activation button, and the small tactile switch is used for accessing special FX sounds, menu navigation, and used in conjunction with the main switch for accessing the Spectrum feature (color change and blade FX change) On most models, these switches are a 16mm Anti-vandal switch, and small tactile 'auxilliary' switch (located 180 degrees from the 16mm AV switch). The Combat Class saber you have purchased is operated by 2 switches. It is not meant for bashing tress, power poles, cars or other various inanimate objects. If used in combat, this saber is meant for, and warranted against use with other custom sabers.

The end user accepts all liability for property damage or personal injury incurred during the use of this product. This custom saber is meant for active use.

#How to get lightsaber sound effect off sound bar manual#

There is a lot you can do as far as customizing the settings and parameters of the Crystal Focus soundboard, for more information please download and use the Crystal Focus 10 manual from for aid in doing so and donвЂ™t forget to make a backup copy of your SD card contents.

This user's manual is meant as an operations and maintenance guide for the Combat Class Saber from Vader's Vault. Vader's Vault Combat Class Saber User's Guide